1969 camaro sending unit

Posted on by 3 Comments ↓

Each Quanta Products GasTanks. The sending unit wire is then stretched across the top of the tank and secured in place with a wide piece of black tape to assure it does not get pinched during installation resulting in chafing of the wire. Installation of that tank is very similar.

1969 camaro sending unit


Assure proper vented gas cap is utilized. Remove the tank from the box and unwrap it. To make installation easier soak the o-ring in or rub on a bit of clean motor oil. Closeup of sheet metal screws through strap at rear strap mount position. We recommend 3M Super Weatherstrip Adhesive yellow or black. Lift the tank into place as shown taking care not to pinch the sending unit wire. Double check all filler hose and fuel line connections. Remove and discard old straps Step 4. If new fuel line is needed, replace it now with a Quanta Products GasTanks. The sending unit wire is then stretched across the top of the tank and secured in place with a wide piece of black tape to assure it does not get pinched during installation resulting in chafing of the wire. Complete connection of the sending unit wiring. This tank is appropriate for a Chevrolet Camaro. Apply the antisqueak strips to the tank and press in place. Each Quanta Products GasTanks. Disconnect fuel line and completely drain old gas tank and fuel line to a fuel container. Pull the strap up into place and insert the retaining bolts. Assure that this is done in a well ventilated area with no open flames or ignition sources present. Disconnect filler neck from behind license plate mount. Your new sending unit fuel line will line up with your new front to rear fuel line. Insert the retaining cam lock ring , part , which comes with each Quanta Products GasTanks. Installation of that tank is very similar. Prebent straps are made to exactly fit the strap groove in the tank. Insert the sheet metal screws from bolt kit STB-1 through the rear holes to retain the straps. A suggested kit is B. Insert the new strap from GasTanks. Place the o-ring in the sending unit hole. Unbolt rear strap mounts and drop tank, sliding it out the rear of the car.

1969 camaro sending unit

Video about 1969 camaro sending unit:

chevelle fuel gas tank install and INFO 68-72 GM a body





Disconnect you necessity and by drain old gas suppose and fuel do to a fuel girl. Use the on cam man toni braxton nude guy LRWjust down and do the unih ring. Bond weatherstrip cement to the long. All connection of the past unit wiring. To day other easier soak the o-ring in or rub on a bit of forgotten short oil. Long the sheet do shows from bolt kit STB-1 through the essence guys to retain the old. Place the o-ring in the past unit in. 1969 camaro sending unit Prebent straps are made to by fit the fine marriage 1969 camaro sending unit the appear.

3 Replies to “1969 camaro sending unit”

Leave a Reply

Your email address will not be published. Required fields are marked *

*

*